
Trade Fair for plastics and rubber
K2025
Visit us at the K2025 – the international trade fair for innovations in the plastics and rubber industry.
Hall 16 / F25
Extrusion Units with Grooved Melting Zone
ADVANTAGES
Extrusion units with grooved melting zones can be used for all single screw extrusion applications and for all thermoplastic polymers. Our units are available in nitrided steel or bimetallic and are produced in-house. The grooves offer the following advantages.
The use of Extrusion units with grooved melting zone reduces the total energy consumption per kg product by 10–25 %.
Using a Extrusion unit with grooved melting zone the output of your single screw extruder can be improved by 20–100 %.
Extrusion units with grooved melting zone reduce the melt temperature.
There is a drastic reduction of wear on a Extrusion unit with grooved melting zone.
It is typical of Extrusion units with grooved melting zone that up to a die pressure of 800 bar the output will be completely stable. Over the whole range of rpm the specific output is constant.
HELIX®PLUS
ADVANTAGES
Helix engineers are constantly improving the technology of grooved melting zones. The next generation is called HELIX®plus. It provides solutions for challenges the modern world faces.
Same output for virgin and regrind material.
Increased output by stable specific output over all screw speeds.
Novel groove design leads to additional reduction of melt temperature.
Let’s talk about your next project
Tel: +49 (0) 71 95-59097 0
Fax: +49 (0) 71 95-59097 99
E-Mail: info@helixgmbh.com